February, 2017 Shanghai-the R&D center of leadgo-tech recently developed a new type high-temperature-resistant vacuum bagging films, and had got through a series of tests. LRF 315R is an high elongation vacuum bagging film, can be used in cure process up to 315℃,it also has good chemical resistant property, ideally suited for use in ultra high temperature vacuum assisted resin infusion process. This release film is supplied in both perforated and non-perforated versions, standard perforations are P1, P3, P6 but other perforations might be possible under request.
The size of LRF315R of our company and the physical performance of LRF315R as shown in the following table
|
Specifications |
|||
|
Colour |
Red |
||
|
Thickness/μm |
25 |
||
|
Width/mm |
1220 |
||
|
Weight[g/m2] |
56 |
||
|
Maximum Use Temperature/℃ |
315 |
||
|
Physical Properties |
|||
|
Tensile Strengt(MD)/MPa |
ATSM D882 |
≥30 |
|
|
Tensile Strengt(TD)/MPa |
ATSM D882 |
≥30 |
|
|
Elongation(MD)/% |
ATSM D882 |
≥350 |
|
|
Elongation(TD)/% |
ATSM D882 |
≥300 |
|
LRF315R sample LRF315R sample in testing
LRF315R has high elongation, suitable for using with all commonly used resin system. Recommend being used in cure process below 315℃.